How to replace radiant heater

Riešenie

Refer always to your product’s user manual safety information before any repair or maintenance operation. https://www.electrolux.com/support/user-manuals/

WARNING! RISK OF ELECTRIC SHOCK

Before any repair or maintenance operation, deactivate the appliance and disconnect the mains plug from the socket.

WARNING! RISK OF INJURY

Always take care when moving appliances. For heavy appliances it's safest for two persons to move it. Always use safety gloves and safety footwear. Wear safety gloves at all times to protect from cuts from sharp edges.

WARNING! RISK OF EYE INJURY

Wear safety glasses if you perform maintenance or repair work involving springs.

WARNING! RISK OF BURNS

Before any repair or maintenance operation make sure the appliance is not hot.

WARNING! CHOKING HAZARD

Small parts not for children under 3 years. Keep all small parts and packaging out of reach of children.

Only adults should use or install the product.

Make sure to use the product only for its designated purpose and verify that it is a compatible part for the intended product.

Do not use or install the product if damaged.

Please note that self-repair or nonprofessional repair can have safety consequences if not done properly and might void the warranty. Possessing the necessary know-how is essential.

HOW TO REPLACE RADIANT HEATER

1 . Unscrew the glass in all positions on the hob glass. Number and placement of screws may vary depending on the appliance

2. Unplug all the wires connected to the coil, the number of wires may vary depending on the appliance. Take a picture of the wires before unplugging them.

3. Push the metal parts holding the coil to the metal plate towards the coil’s center. Then pull the coil up.

4. Push the holding springs up to remove them from the coils, you can help yourself with a screwdriver.

5. When reassembling, repeat steps in reverse order.